Campbell Hausfeld RP330000AV Digital Tire Inflator Review

The Campbell Hausfeld RP330000AV is a digital tire inflation system. You can use it to inflate sports equipments, car tires, or bike tires. You can find this model for an average price of $90. Keep reading to learn about some of the feaatures that it offers.

Operation

The Campbell Hausfeld RP330000AV digital tire inflator is very easy to operate. You simply have to connect the unit to your tire, input your desired pressure on the dial, then push the button to operate.

Display

The Campbell Hausfeld RP330000AV is a best electric pressure washer for the money also features a 3-inch digital gauge. The gauge is designed to be easy to see under various lighting conditions. There is also a visual progress meter so you can watch the tire being inflated to your desired pressure. The unit will automatically shutoff once this pressure has been reached.

Power

The Campbell Hausfeld RP330000AV tire inflation system is coupled with a ten foot power cord. Therefore, you won't have to worry about being restrained when using the device. There is also a built-in cord wrap so the power cord will store neatly.

Includes

The best Campbell Hausfeld pressure washer is packaged with a variety of accessories to get you started. There are two inflation needles in the package which are useful when inflating sports or beach equipment. There is also a 2-foot non-marring hose. The inflator has a hose corral on the unit to keep it in place.

Design

The pressure washer surface cleaner reviews measures nine inches long and six inches wide. Weighs slightly over four pounds, you'll find that the unit will easily fit inside your trunk for storage. It is backed by a one year limited warranty.

The Campbell Hausfeld RP330000AV digital tire inflator offers a 3-inch display which is designed to be easy to read. There is also a ten foot power cord so you don't have to worry about being restrained. You're also provided with a 2-foot non-marring hose and two inflation needles.

The other articles that you need:

• Staining a Deck: The Hard Way
• How to Avoid Common Brick Maintenance Mistakes
• How to Clean Your Window Air Conditioner so it Runs Like New

Read More

Staining a Deck: The Hard Way

Staining a Deck: The Hard Way

We all love getting a bigger and better deck added onto the house, until the day comes that you have to stain all that extra wood. I think when it's done right, a stained deck not only last much longer, but looks great for years.

We had our rickety side deck removed and replaced it with a much wider and heavier deck that went to the back of the house and connected to our larger deck. The back deck , also in bad shape, and wobbly from being ten foot off the ground with 4x4's supporting it that weren't cemented in or nailed down was twice as stable now too. The porch looked great, but I was eager to give it a little color once the wood seasoned the first year. I knew it was a big job, but I didn't prepare for the mistakes that I was about to make ahead.

My first mistake was choosing a cheaper, but faster way to apply the stain. After some research I figured the bean sprayer was the way for me seeing that I had two lying around. I needed to pressure wash the whole deck first and let it dry. The back deck having new rails and some boards replaced was off colored already, so the pressure washing was extra important for blending and removing the eight years of mold and aged stain. I used a smaller 1100 karcher electric pressure washer reviews which worked fine when new, but would suggest for better time, rent or borrow a larger one from a friend. After, a couple of sunny days it was time to apply some stain. Cedar stain is always appealing to me at first glance, but from experience, I know the color doesn't hold well and appears dreadfully red when done.

Now I prefer a nice oak or lighter cherry color that will fade naturally without any apparent splotches. One mistake I made as usual is underestimating the amount of stain I would need, due in part to that bean sprayer, but more on that later. Just to note, make sure you have paint thinner and different size brushes on hand for the cleaning up and the touch ups that are expected. Let's get back to that bean sprayer. The sprayer started off nicely with an even spray and making good coverage, but it was a hot day and before long I noticed the quality of my coverage was diminishing fast. The tip was clogging up with dry stain that caused me many hours of removing the tip to soak in thinner or bang dried stain out of. I'm a relatively patient person when it comes to projects, but besides cleaning the tip of the sprayer, I spent a lot of time filling and pumping the sprayer. When the pressure washer surface cleaner reviews would get low, the width of the spray and mist would start streaming. This caused for a lot of waste and an arm workout.

The porch turned out nice as you can see in the pictures, but in addition to the other tribulations was a bigger mess, overspray. In all, I ended up with 6 five gallon cans of Thompson's wood stain from Wal-Mart, of which I have about half of one left under the house. Of those cans, one full can is now applied to my shed, mower, yard, and most of the vinyl siding around the house. I figured on some overspray and we used cardboard wedged in around the top to protect the siding, but with the quality of the sprayer and my desire to finish, I just stopped caring at some point. It has faded on the vinyl siding some, but now I have a large cage out back made of wood, and this year is when we should stain it. This time I will shop for a quality sprayer that is designed for stain with a larger tank, and I plan to have old blankets, cardboard, plastic and tape on hand. In addition I will work one section at a time to ensure any overspray isn't staining everything I own. Leave the bean sprayer for something small.

See more at: https://pressurewasherguides.com/

Read More

How to Avoid Common Brick Maintenance Mistakes

Brick Cleaning and Repair for the Beginner

There is more to brick cleaning than meets the eye and common maintenance mistakes can lead to the ultimate error in judgment: painting brick. Put down that paintbrush and learn a few tips on how to get (and keep) your brick clean and looking great.

Brick Maintenance 101: Getting to Know Your Brick

Not all bricks are the typical red square you see in the garden shed and by the side of a construction site. Keeping brick clean means knowing what kinds of brick maintenance tasks are appropriate. This, in turn, depends on the kinds of brickwork used in the home. Possible options include the brick panel that is a veneer-like covering rather than the full sized brick, the raw building brick and also the thinner flooring bricks with one or more coats of sealant. Taking a "one size fits all approach" to brick maintenance is a cardinal error.

Insider Tip: Don't know if bricks are sealed? Splash a section of bricks with water. If the material soaks up the water and features a dark, slowly drying stain, there is no sealant. Pearling water or minimal darkening indicates one or more coats of sealant.

Brick Maintenance 102: Brick Repair Is a Must to Keep Brick Clean

Basic brick maintenance dictates that damaged pieces must receive a bit of extra attention to avoid spreading problems. Fix chipped brick panels by replacing the affected portion of the panel with a new one. Loose panels must be refastened to the underlying studs with new screws. Patch any remaining gap with paintable cement filler. Neglecting proper brick repair tasks prior to cleaning is a common mistake made by homeowners, who believe in the indestructibility of the medium; bricks are tough, but they do need occasional repairs.

Insider Tip: For small holes, chips and cracks, paintable cement filler is an excellent solution when touching up individual bricks. Place a blue piece of painter's tape on each treated brick, since this makes it easier to return and apply coloring and coating as needed.

Painting Brick: Finishing Touches to Brick Repair

The ultimate mistake of brick maintenance is painting brick in a color other than the one intended by the brick maker. It is unclear why a painted brick wall is more appealing (to some) than a properly maintained raw brick counterpart. That being said, there is a place for painting brick: the judicious application of touch-up paint after brick repair. Return to the taped bricks and restore their appearance where paintable cement fixes a gash or crack. Paint and seal over the cement in keeping with the brick's color scheme and texture flow.

Insider Tip: This kind of painting brick work might require multiple color matches, especially to accommodate weathering, natural shading of the material and also color differences. Applying brick paint that is matched to one brick color to an entire wall is a common mistake that leaves an area with numerous repairs and touch-ups look a bit like Swiss cheese. Invest in as much paint as needed; it's worth it!

Brick Cleaning 101: Keeping It Looking Beautiful

Do not use a wire brush, harsh solvents or the concentrated spray of a best electric pressure washer. All these things will get the brick clean, but they will also cause hairline cracks, scrape off any coatings, lead to discolorations and overall do an extraordinary amount of damage.

Do use a garden hose, bristle brush and diluted dishwashing detergent. Wet down the bricks with the garden hose, apply the soapy solution with the bristle brush, rinse off the bricks with the hose and it's finished.

Read More

How to Clean Your Window Air Conditioner so it Runs Like New

How to Clean Your Window Air Conditioner so it Runs Like New

Does your window air conditioner seem to lose its ability to cool over these last few years? Does it seem like your air conditioner is working harder and harder? In this article I show you how get that old air conditioner to function like new again.

Remove from the window

Depending on the size of the air conditioner its best to take it out of the window if at all possible. Some air conditioners that cool large size rooms take almost two people to remove. If the unit is too big than we can try to clean it where it sits. Smaller units are easier to remove and you can take those out easily. Once removed you can take it outside in the driveway or garage. Where you remove it to will depend on what cleaning method you choose. I will discuss those options later in this article.

Remove the faceplate

When removing the faceplate there are two or three screws that you have to remove to pull of the faceplate. If your room air conditioner has knobs on the front remove those too. Take the faceplate and wash it. The easiest way to do this is to use the garden hose on it and spray out all the spray and dirt. When your done you can wipe it down with wet wipe to remove any excess dirt. Clean the faceplate throughly so it looks like new.

Remove the filter

Most air conditioner filters you have to clean as well. You can use a hose or compressed air and make sure it gets cleaned thoroughly. The older window air conditioners had replaceable filters. No matter which one you have make sure to replace or clean it so that no dust or dirt remains. If you use water just let it dry for a little while.

Cleaning the air conditioner unit

Now its time to clean the unit. The methods you choose to do so entirely depend on you. Its not enough just to clean the filter. You want to clean the coils and the fan. I used a garden hose and took the unit outside and sprayed water through the coils and the fan. Not only did this take less time it did a great job. If you use this method just let the water drip out. If you let it drip out for awhile you should be okay before you plug it back in. The electric motor is sealed and water won't get inside. You can use a tooth brush to clean in the coils but this takes a little more time. You can also use compressed air. I would recommend if you use this method use two cans of compressed air to make sure its throughly cleaned of any dust and dirt. The larger units you leave in the window you can use the compressed air, tooth brush, or drag a hose through to wash it out the back. However using water inside the house could make a mess. Better to use the compressed air method.

Dust and dirt makes the unit work harder and use more electricity. The unit will cycle more often when dirty which can cause blown fuses and circuit breakers.

Wipe it down

Once you have cleaned the coils wipe the unit down and put it back together. You can put it back in the window. Once you run it you will notice the difference right away. Not only will it look brand new but it will work like its brand new.

No need to replace that old air conditioner just clean it and watch it work like new.

2 Comments

Greg 2/28/2013
Thank you for your information as a former owner of a large window air conditioner service and warranty business I find that to many people fail to pull there units out of the window and really get them clean once and a while. I have cleaned thousands and here are a few more tips. Put a plastic bag around the motor, even though its sealed it helps with the bearings. Prop the ac up on one side that the water runs out as you clean it. Really clean the inside coil good with top job or simple green I always liked to know my air was recirculation across a clean coil.
Sometimes because the condenser wont come clean, you may have to remove the screws and very gently pull it out of its shroud to get it clean.It may take some strong detergent or even an electric pressure washer reviews, using the fan tip of course.
good luck

Juan Huang Lo 6/27/2012
LOL. "Coils"? Really. Perhaps if you knew the subject a bit better you would have earned the $25 Yahoo paid you. An air conditioner pulls room air through the filter and then the evaporator. The evaporator will not get horribly dirty for quite a few years. The dirt will accumulate on the room side. It is the condenser that generally gets fouled with dirt and the by product of certain trees; cotton wood trees are the worst! A fan blows through the condenser and blows particulate matter with it. You can tell it is clogged when you feel the output while it is running. Stand outside and feel the air coming out. It should be equal in the corners as it is in the center. If the air is weak in the corners, it needs cleaning.

Read More

Improve the Curb Appeal of Your Home This Summer

Great Curb Appeal in 8 Easy Steps

Improve the Curb Appeal of Your Home This Summer

If you're looking for a summer project, why not consider improving the curb appeal of your home? This is a project that's not only enjoyable, but also adds to the value of your home.
Improve the Curb Appeal of Your Home This

Summer #1: Pressure Wash

A good cleaning will greatly improve the curb appeal of your home. This summer, visit your local Walmart and buy a 2500 PSI pressure washer that is powerful enough to clean your home. But, skip the special cleaners that are sold at Walmart and make you own solution using bleach and water. On the day you pressure wash your home, be sure to wear old clothes, because you will get bleach on you. You can always hire someone to do this for you, but it will cost as much as a new 1500 PSI pressure washer, so you might as well do it yourself.

Improve the Curb Appeal of Your Home This Summer #2: Paint

Whether the paint on your home is peeling or just outdated, a paint job will improve the curb appeal of your home. While you may be tempted to choose a bold color, try and keep your choice down to earth. Even if you plan on keeping your home forever, a bold color choice will only cause your neighbors to complain until you repaint your home.

Improve the Curb Appeal of Your Home This Summer #3: Create Flower Beds

Flowers beds improve the curb appeal of your home by adding color. This summer take the time to create flower beds outside your home. A flower bed on either side of your front entrance filled with pansies is simply gorgeous. You can either choose one color or mix two to three colors together.

Improve the Curb Appeal of Your Home This Summer #4: Create a Walkway

A walkway adds to the curb appeal of your home while being functional. Walking through a muddy yard with several bags of groceries is never fun and its even less fun when you have soggy shoes. You can either buying stepping stones or you can create your own with kits available at your local hardware store.

Improve the Curb Appeal of Your Home This Summer #5: Plant Shrubbery

Shrubbery will improve the curb appeal of your home, while providing you and your family with privacy. Instead of putting flowers in your flowers beds, why not place bushes in there? You could then surround the bushes with small rocks and solar lighting. This is a beautiful touch that also allows you to easily find your porch in the dark.

Improve the Curb Appeal of Your Home This Summer #6: Add Solar Lighting

Solar lighting is a way to add protection to your home, while improving the curb appeal of your home as well. Homes that have solar lighting are less likely to be robbed. Why? Robbers do not want to be seen and solar lighting will make it very easy for people to see someone sneaking around your home. Solar lighting that is triggered by movement is only useful if your neighborhood is free from wondering animals. If your solar lights are always being tripped by animals, your neighbors will never pay attention when they come on.

Improve the Curb Appeal of Your Home This Summer #7: Buy a New Door

A new door can greatly improve the curb appeal of your home. Also a new door is completely customizable if you shop at Lowe's. Lowe's allows you to pick the color, style, metal, etc. so that your door is truly unique.

Improve the Curb Appeal of Your Home This Summer #8: Redo the Driveway

Whether your driveway is gravel or asphalt, you can still improve the curb appeal of your home this summer. If your driveway is gravel, the obvious solution is to have your driveway paved. If your driveway is already paved, you may want to add flowers along the sides of it as a way to brighten the path to your home.

Source: https://pressurewasherguides.com/electric-pressure-washer/

Read More

The Pros and Cons of Staining Your Deck

The Pros and Cons of Staining Your Deck

When I bought my house in the mountains, I was a little put off by the condition of the deck. It was well made and sturdy, constructed of ironwood on a steel I-beam, but it hadn't been treated so it was that awful light gray, the result of UV exposure and mold.

While the gray matched the house paint surprisingly well, I'd been raised to consider fine wood the ultimate in materials. You protected it, displayed it, sometimes stained it, and you certainly never painted it!

I decided to do something about my painfully gray deck, partly because I hated the gray, but mostly because I knew ironwood to be absolutely beautiful, a lot like mahogany or teak, and I wanted to bring that out.

How to restore your deck

First, you have to wash it. My deck was filthy, so I hired a contractor to power wash it, but you can do that yourself if you have a decent 3500 PSI pressure washer. This is not a quick or easy job; it took hours to clean my fairly large deck. I was amazed at the grain that was exposed by the cutting stream of water, but the deck was still killer gray. Next step, stain.

I would have preferred to restore the wood to its natural color, but that was no longer possible. You can't sand ironwood. I selected Australian Timber Oil in Mahogany Flame to approximate the original color and it worked exceptionally well. The grain jumped off the surface in a rich, warm red-brown that glowed with natural beauty, even after all those years of neglect.

Then I noticed gray in the spaces between each board that jumped up in an entirely different and unacceptable way. I tried to get into the spaces with a brush, but that didn't work very well so I bought a crack tool, which would have worked perfectly if my boards had been properly spaced. As it was, I did the best I could, but you can still find gray peaking up from the decking.

You can use a sprayer to apply the stain that will get into the cracks, but you end up using more stain that way and if you don't know what you're doing, as I didn't, you'll probably make an unholy mess.

I didn't apply the product under the best circumstances (it rained each afternoon), but even without the 24-48 hours it should have had to dry, it still provided protection. That protection has faded as the Sun has worked on it, but I live at over 7,000' so those of you at sea level should fare better. After all, this was my deck's first treatment in many years, perhaps ever.

So was it worth it?

Yes and no. While I think the deck looks much better now, I'll have to apply a new coat of stain every year. And stain scratches. If you have patio furniture, move it very carefully or you'll scrape the surface rather noticeably. Before the restoration, you couldn't see the scratches; they blended in with the gray (or if they didn't they would soon enough), but a dark stain is very prone to damage.

However, it's more likely you don't have ironwood for your decking. You probably have pine or redwood. These woods are soft so be careful with the best electric power washer our you'll literally scar the surface with the cutting spray. And remember, dark stains show scratches so pick your stain accordingly. Light colors wear better.

You do have another option with these softer woods that I didn't have. You can sand them back to their original color, then simply apply a preservative. Then if you scrape the surface, it won't really show much as the scratch will blend with the color of the wood underneath it. You will, however, still have to deal with that gray between the boards, if you have any.

I'm glad I stained my deck. It looks fantastic now, but I realize I've taken on a yearly project that's time consuming and expensive. That stain costs $45 a gallon and I needed over 3 gallons to cover the deck and railing, not to mention the $320 I paid the contractor to clean it. If you can live with the gray, your life will be easier, but you'll miss out on all the beauty your deck has to offer.

Source: https://pressurewasherguides.com/gas-pressure-washer/

Read More

Deck Cleaning

Deck Cleaning

A deck is a great investment. It's attractive and functional, creates more square footage for your home and increases its overall value. And with such an important investment, it's always a good idea to let a professional decking contractor get the job done right. But after they leave, it's up to you to maintain it. A bi-annual deck cleaning will help prolong the lifespan of your deck and keep it looking good for years to come.

Cleaning Basics - Besides using the leaf blower to get rid of leaves and dirt, a deck's surface needs to be cleaned to remove buildup that can harbor mildew and fungus. Even if your deck is made from composites, cleaning it bi-annually is a must because staining and fading can become a problem over time. But composites and wood decks must be cleaned differently. Here's the scoop:

Composites: For composites, use an acid/deck brush and a composite material cleaner. Duckback Products makes several different cleaning products. This can help keep composite decking (and siding) looking bright and clean without being too harsh on the material or being chemically caustic, like some wood decking cleaners can be to composite materials. Avoid any cleaners that use bleach to keep your composite decking looking brand new.

A pressure washer is suitable to clean away stubborn stains and debris from composite decking. However, keep the pressure down and use a wide spray nozzle to help prevent streaking and delamination that can sometimes occur with high-pressure sprays. A biodegradable soap solution will work best in combination with a pressure washing to help keep composites clean while being eco-friendly to your surrounding plants.

Wood: For wood decks, a deck brush like the Weiler 10" deck scrub brush and a mix of oxygenated bleach and water will remove mild stains and keep wood decking looking bright and clean for months. Heavier stains from leaves or puddled water can be removed using a spray-on deck bleach. These dangerous chemicals can be caustic so be careful.

A very common mistake when cleaning a wood deck is to use a pressure washer. This is a big no-no! The pressurized water enters into the wood grain, permanently damaging wood fibers. Mold and mildew can then easily penetrate the interior of the wood, quickly subjecting it to rot. Never use a pressure washer on a wood deck. Instead, always use a brush and an approved wood cleaner.

Source: campbell hausfeld electric pressure washer

Read More